Fast,
Simple
Jointing

Hardscaper grout product range

Important Product Information

Before Using Joint-It Simple

Joint-It® strongly recommends that you watch the step-by-step video guide to protect your rights under manufacturers warranty.

Step by Step Guide

Before you use Joint-It products, we strongly recommend that you watch our step by step video guides
and read our instructions for use to protect your rights under manufacturers warranty.

Reference

Foundation

Foundation / base must be water permeable. Use compacted hardcore 100-150mm deep. Allow space for 50mm sand and cement and the depth of your paving slab on top.

Sand

Use a sharp gritty sand. To see what sharp gritty sand looks like – watch Video One.

Mix

Sand and Cement mix must be used in ratio of 1 measure of cement to 6 measures of sand. Mixture will be semi-dry.

Joint Depth

Joints must be a minimum of 25mm deep.

Joint Width

Joints must be a minimum of 3mm wide.

Preparation

Clean the paving and remove all dust and debris from the joints before you apply Joint-It Simple.

Important Safety Information!

  • Causes Skin Irritation.
  • Causes Eye Irritation.
  • Keep out of the reach of children.
  • Keep container tightly sealed.
  • If on skin or in eyes, refer to Safety Data Sheet or product packaging for more information.

If you need information about our Joint-It Simple formulation, for safety or allergy information, please download our Safety Data Sheet.