joint-it-so-clean

Joint-It So Clean

Multi-purpose Cleaner for Natural Stone and Concrete paving, paths, roof tiles and walls.

Available in 5L and 1L.

Strong-&-Effective-badge
ISO-14001-badge
ISO-9001-badge
Storage-icon

Storage

Store in a cool, well ventilated area in original container.

Keep container tightly closed.

joint it benefits icon

Benefits

  • Ready-to-use
  • Multi-purpose
  • Non-staining
  • Spray-and-go
  • Long lasting results
  • Strong and Effective
  • Also suitable for use on paths, roof tiles and walls.

Icon for measurements & calvculations

Surface Preparation

Brush away leaves, debris and any heavy growth before application.

Icon for measurements & calvculations

Coverage

Coverage depends on the porosity, type and texture of the surface.

A general guideline is 6m² per litre.

Find out how much product you will need by using our Joint-It So Clean Calculator.

Danger

Causes severe skin burns and eye damage.

Corrosive.

Contains: Ethoxyulated Alcohols, quaternary Ammonium Compounds Do not breathe gas, fumes, mist or spray.

Wear protective gloves, protective clothing, eye protection and face protection while using this product.

Very toxic to aquatic life, plants and grass.

icon of a trowel

Application Instructions

Always test a small hidden area before application.

Do not apply if raining or if rain is expected within four hours to maintain product performance.

DO NOT DILUTE THIS PRODUCT.

Using a spray or watering can, apply product to point of saturation.

Leave the product to work.

Visible improvement within 24 hours.

For very dirty/heavily soiled surfaces, apply the product neat and work into the surface with a stiff brush.

Power-wash off after 30 minutes.

Reapply and leave.

Health & Safety

IF SWALLOWED: Rinse Mouth. No NOT induce vomiting.

IF ON SKIN (or hair): Immediately remove all contaminated clothing. Rinse skin with water.

IF INHALED: Remove person to fresh air and keep comfortable for breathing.

IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Keep out of the reach of children.

Joint-It So Clean Step by Step Guide

Apply product using a spray or watering can to saturate surface. On walls / vertical surfaces, start to spray from the bottom of the wall in an upwards direction to avoid product running.
Visible improvement after 24 hours.
If your surface is heavily soiled, apply product as above and work it into the surface with a hard brush.
Wait 30 minutes.
Power-wash treated area.
Reapply Joint-It So Clean using a watering can or spray.

FAQs: Joint-It So Clean

Joint-It So Clean is an all-purpose surface cleaner. It is a ready-to-use premium product that requires minimal effort with highly effective results.

  • No need for scrubbing
  • Read-to-use
  • Non-staining
  • Does not alter the appearance of the surface
  • Powerful and effective
  • Fast acting
  • Long lasting results
  • Low odour

Joint-It So Clean can be used on all surfaces, including natural stone & concrete paving, walls, paths, roofs, decking, tarmac and block paving.

This depends on the porosity, type and texture of the surface. We highly recommend testing a small hidden area of the surface to determine quantity required. The more porous the stone, the more product you will need.

A general guideline:

  • Heavy soiling: 3 m²/l
  • Light soiling: 5 m²/l