Skip to content


colour enhancing solution for pavers

Important Product Information

Joint-It Supreme Colour Enhancer

Also suitable for use on natural stone and concrete paths, driveways, roof tiles and walls.

Joint-It Supreme Colour Enhancer Step by Step Guide

Apply product using a low pressure spray, roller or brush to vertical / horizontal surfaces to the point of saturation.
If required, add a second coat while the first coat is still wet.

Do no apply a second coat if the first coat has already dried.

Precautions For Use

  • Do not apply Joint-It Supreme Colour Enhance if rain is expected in four hours.
  • Do not dilute this product.
  • Product works immediately but it may take up to 7 days to reach 100% efficacy.
  • Do not apply a second coat if first coat has dried.
  • Do not apply during rain or frost or when temperature drops below 3°C or above 30°C.
  • Wear protective gloves, glasses and appropriate clothing while using Joint-It Supreme Colour Enhancer.
  • Keep children and pets off surface until it is completely dry.
  • Keep out of the reach of children.

If you need information about our Joint-It Supreme Colour Enhancer formulation, for safety or allergy information, please download our Safety Data Sheet.