Joint-It So Clean™

Joint-It So Clean™

The only product you need to clean all your natural stone & concrete paving jobs.

All purpose, powerful and effective eco-friendly formula for cleaning natural stone and concrete paving

Natural Stone & Concrete Paving Cleaner

BENEFITS

Ready-to-use

Fast Acting

Spray-and-go

Non-staining

Long lasting
results

No scrubbing or power washer required

SURFACE PREPARATION

Brush away leaves, debris, any heavy growth before treatment.

APPLICATION INSTRUCTIONS

Do not apply if raining or if rain is expected within 4 hours of application.

Always test a small hidden portion of the surface before application.

Apply neat using a spray or watering can, making sure to soak the surface.

Leave the product to work. Visible improvement within 24 hours.

* For very dirty, heavily soiled areas:
Apply neat. Use a stiff brush to work the product into the paving. Power wash off after 30 minutes, reapply and leave.

COVERAGE

Approx. 6m² per litre, however this depends on the porosity of the stone.

PRECAUTIONS FOR USE

Keep out of reach of children. Do not get in eyes, on skin, or on clothing. Wear protective gloves/protective clothing/eye protection/face protection.

IF ON SKIN:
Wash with plenty of water. If skin irritation occurs: Get medical advice/attention.

IF INHALED:
Remove person to fresh air and keep comfortable for breathing. Get medical advice/attention if you feel unwell.

IF IN EYES:
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, get medical advice/attention.

You may have been wondering why it has taken us so long to release more products for our Joint-It range. We have been working tirelessly to create effective, long-lasting products that tie in with our eco-friendly ethos. It hasn’t been an easy task getting the balance perfectly right, and we didn’t want to rush the process to release any products until we were 100% confident in their performance.

We are now hugely proud to launch 3 new, eco-friendly products that deliver outstanding, long-lasting results that we are confident our customers will love. We have been testing these products for a long time to make sure their quality is in line with our existing, best-in-class Joint-It Simple™.

We recommend using our products with the rest of the Joint-It range for best results.

Joint-It So Clean™ FAQs

Joint-It So Clean™ is an all-purpose natural stone and concrete paving cleaner. It is a ready-to-use premium eco-friendly product that requires minimal effort with highly effective, long lasting results.

  • No need for scrubbing or power washing (except in very heavily soiled areas)
  • Spray and go product
  • Non-staining
  • Does not alter the appearance of the surface
  • Powerful and effective
  • Fast acting
  • Long lasting results
  • Low odour

Joint-It So Clean™ can be used on all surfaces, including natural stone and concrete paving, patios and drives.

Make sure to brush away all leaves, debris, and heavy growth before treating the surface.

Always patch test a small hidden area before use to ensure surface compatibility and to check that the performance, finish and texture meets expectations.

Do not apply in wet/damp conditions or if rain is expected within 4 hours of application.

You can use the product neat as supplied. For light soiling, you can dilute the product at a ratio of up to 1:5 in clean water.

This depends on the porosity of the surface. A general guideline is 4-6m² per litre. Always patch test a small hidden area before use.  Your test area will give you an indication of how much product you will need.

Always patch test a small hidden area before use to ensure performance, surface compatibility and to ensure the finish and texture is as desired.

  1. Apply neat using a spray or watering can, making sure to soak the surface.
  2. Leave the product to work. There will be a visible difference within 24 hours.

In general, Joint-It So Clean is a spray and go product so you don’t need to use a power-washer. However, in some cases where a surface is extremely soiled, apply Joint-It So Clean neat, power wash off after 30 minutes, then reapply and leave.

Clean all equipment and tools immediately after use with water. Always read safety instructions before use.

Keep in a dry place between 5°c and 30°c in the original container.

Keep out of reach of children.