Joint-It Grout Haze Remover
Effectively remove grout residue from stone, concrete & porcelain surfaces
Joint-It Grout Haze Remover is your go-to solution for removing grout haze, cement residue, and boot marks from a wide range of surfaces — including porcelain, natural stone, and concrete. Whether you’re cleaning up after a new application of a jointing compound or refreshing old surfaces, this powerful formula restores a spotless, streak-free finish with minimal effort.
Proudly manufactured in-house by Joint-It, this product is developed with the same high-performance standards trusted by professionals and DIYers alike.
Why choose Joint-It Grout Haze Remover?
✅ Fast-acting, professional-strength formula
✅ Ready to use formulation
✅ Safe for indoor and outdoor use
✅ Removes grout haze effectively
✅ Ideal for patios, driveways, tiled floors & stone surfaces
✅ Easy to apply with basic tools – no special equipment needed
Use on:
Porcelain • Natural stone • Concrete • Sandstone • Granite
Application is simple:
All you need is clean water, a sponge or paint brush, and standard safety gear. For more porous surfaces, a power washer may be required to lift deeper residue.
Restore the original look of your surfaces with ease and confidence.
Please contact us on info@jointit.com for more information about Joint-It Grout Haze Remover.
Joint-It Grout Haze Remover
Step By Step Guide
Step 1:
Shake bottle well. Use safety gloves and safety goggles when handling the product. Pour product on to the affected area directly from the bottle. Apply generously.
Step 2:
Using a clean paint brush, sponge, or similar, spread the product on to the haze. Scrub well in a circular motion.
Step 3:
Leave product to work for 2-4 hours. In higher temperatures, product may be absorbed more quickly.
Step 4:
Using a garden hose, rinse product completely off the flags. For more porous surfaces, a power washer may be required.
FAQ’S: Joint-It Grout Haze Remover
GENERAL INFO
Joint-It Grout Haze Remover is a professional-strength formulation that helps to remove epoxy grout haze left on the surface of tiles after the jointing process.
In cases where a very porous stone has not been pre-sealed prior to the jointing process, or if insufficient water has been used during the jointing compound application, it may leave a residue that accentuates any natural discolouration in the stone. This enhancement is called grout haze.
Different stone types can have slightly varied reactions. Some stone is more porous than others, so the enhancement is more noticeable and can take longer to weather off and disappear naturally.
Joint-It Grout Haze Remover is suitable for application on both internal and external surfaces, such as porcelain, natural stone & concrete paving. It can be used on paths, patios and driveways.
This depends on the porosity, type and texture of the surface, as well as the severity of the haze. We highly recommend testing a small hidden area of the surface to determine quantity required. The more porous the stone and severity of the haze, the more product you will need.
A general guideline:
- Heavy haze: 4 m²/l
- Light haze: 5 m²/l
BEFORE USE
Brush away leaves, debris and any heavy growth before treatment.
Always follow the product application guidelines and relevant health and safety requirements. The information provided is based on our knowledge at the time of the latest update; however, Joint-It cannot foresee every possible application, material or circumstance in which the product may be used.
It is the user’s responsibility to ensure Joint-It Grout Haze Remover is suitable for their specific application. We recommend testing the product on a small, discreet area first and checking you are happy with the result before continuing with the full application.
If you are unsure about product suitability, compatibility with another product or material, or possible reactions involving people or pets, please contact Joint-It Ltd for advice before use.
Joint-It Ltd cannot accept responsibility for issues arising from misuse of the product or use outside the recommended application guidelines.
HOW TO USE
Always test a small hidden area before beginning works. DO NOT DILUTE THIS PRODUCT. Always use safety gloves and safety goggles when handling the product.
Shake the contents well before applying. Pour product on to the affected area(s). Using a clean paint brush, sponge, or similar, scrub well in a circular motion. Keep product away from the joints, as it will break the jointing compound down. Leave the product to work for 2-4 hours, then rinse off completely using a garden hose.
For very dirty/heavily soiled, or porous surfaces: Apply neat and use a stiff brush to work the product into the surface. Power wash off after 2-4 hours.
Always test a small hidden area before beginning works. DO NOT DILUTE THIS PRODUCT.
Pour product on to the affected area(s). Using a clean paint brush, sponge, or similar, scrub well in a circular motion. Leave the product to work for 2-4 hours, then rinse off completely using a garden hose. In higher temperatures, product may be absorbed more quickly.
For very dirty/heavily soiled, or porous surfaces: Apply neat and use a stiff brush to work the product into the surface. Power wash off after 2-4 hours.
For very dirty/heavily soiled, or porous surfaces, a power washer may be required. Apply neat and use a stiff brush to work the product into the surface, taking care to keep the product away from the joints. Power wash off after 2-4 hours.
WHEN NOT TO USE
No. Joint-It Grout Haze Remover cannot be used if rain is expected within 3 hours.
Recommended for you
Joint-It Premium Seal
For lasting results, we recommend using a premium paving sealer. Why not try our Joint-It Premium Seal to keep your patio cleaner for longer?
Find Your Local Stockist